Crisper Humidity Control; Removing Crisper; Glide'n'serve; Glide‘n’serve - LG LFD21870 Series User's Manual And Installation Instructions

CRISPER HUMIDITY CONTROL

You can control the amount of humidity in the moisture-
sealed crispers. Store vegetables or fruits requiring more
or less humidity in separate crispers. Adjust the control to
any setting between HIGH and LOW.
• LOW lets moist air out of the crisper for best storage of
fruits.
• HIGH keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
CAUTION
: The glass shelf over the crisper is not
firmly secured. Be careful when tilting.

REMOVING CRISPER

1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
USING YOUR REFRIGERATOR
24

GLIDE'N'SERVE

The Glide'N'Serve provides storage space with a variable
temperature control that keeps the compartment colder
than refrigerator.
This drawer can be used for large party trays, deli items,
or beverages.
Controls
The control regulates the air temperature in the drawer.
Set control level to COLD (print on surface) to provide
normal refrigerator temperature. Use the COLDER
(print on surface) setting for meats or other deli items.
NOTE: Cold air directed to the Glide'N'Serve can
decrease refrigerator temperature. Refrigerator control
may need to be adjusted.
To replace Glide'N'Serve
1
1. To remove, pull the drawer out to full extension.
2. Lift the front of the drawer up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.