Replacing The Battery; The Concept - BMW X5 2016 Owner's Manual

Table of Contents

Advertisement

Replacing the battery

1.
Remove integrated key from remote con‐
trol.
2.
Raise the cover of the battery compart‐
ment, arrow 1.
3.
Remove the cover of the battery compart‐
ment, arrow 2.
4.
Insert a battery of the same type with the
positive side facing up.
5.
Press the cover closed.
Have old battery disposed of by a
dealer's service center or another
qualified service center or repair shop
or take it to a collection point.
New remote controls
New remote controls are available from a
dealer's service center or another qualified
service center or repair shop.
Loss of the remote controls
The lost remote control can be blocked by a
dealer's service center or another qualified
service center or repair shop.
Emergency detection of remote
control
It is possible to switch on the ignition or start
the engine in situations such as the following:
Interference of radio transmission to re‐
mote control by external sources e.g., by
radio masts.
Empty battery in remote control.
I n f o r ma t i o n P r o v i d e d b y :
Online Edition for Part no. 01 40 2 963 410 - VI/15
Opening and closing
Interference from radio transmissions
through mobile devices in close proximity
to remote control.
Interference of radio transmission by
charger while charging items such as mo‐
bile devices in the vehicle.
A Check Control message is displayed if an at‐
tempt is made to switch on the ignition or start
the engine.
Starting the engine with emergency
detection of the remote control
If a respective Check Control message ap‐
pears, hold the remote control with its back
against the marked area on the steering col‐
umn. The tailgate button on the remote control
should be at the same height as the marked
area. Press the Start/Stop button within
10 seconds while pressing the brake pedal.
If the remote control is not recognized: slightly
change the height position of the remote con‐
trol and repeat the procedure.
Personal Profile

The concept

Personal Profile provides three profiles, using
which personal vehicle settings can be stored.
Every remote control has one of these profiles
assigned.
If the vehicle is unlocked using a remote con‐
trol, the assigned personal profile will be acti‐
vated. All settings stored in the profile are au‐
tomatically applied.
Controls
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents