Programming Your Coffeemaker; Setting The Time; Programming The Auto On; Programming The Variable Auto Off - Cuisinart Brew Central DCC-1200C Series Instruction Booklet

PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. To turn the coffeemaker on and off:
a. Turn on: To turn coffeemaker on, turn
the function knob to the "Brew" position.
Lift the flip switch up and release. The red
"on" indicator light illuminates and brewing
cycle starts.
b. Turn off: Depress the flip switch down
and release.
2. To set the time:
Turn the function knob to "Clock". Push and
hold or pulse the "Hour" or "Minute" buttons
to set the time of day. Turn the function knob
to any other setting to begin time, or simply
wait until the numerals stop blinking.
a. "Hour" Button: To change the hour,
press the "Hour" pushbutton. Pressing
and holding the pushbutton will cause
hours to increase more rapidly. Pulse the
pushbutton to increase hour more
slowly. When the number count passes
12, the PM light activates and will be
displayed on the LCD. After setting the
time, the default hour is the last time set
unless power is lost.
b. "Minute" Button: To change the
minute, press the "Minute" pushbutton.
Pressing and holding the pushbutton will
cause minutes to increase more rapidly.
Pulse the pushbutton to increase
minutes more slowly. After setting the
time, the default minute is the last time
set, unless power is lost.
Note: As you scroll, the numbers will
advance slowly at first and then speed
up to the rate of about three per second.
When the number displayed approaches
the desired setting, release the button
and press repeatedly to advance one
digit at a time.
7
3. To program the Auto On:
Turn the function knob to "Program" to set
the desired time to engage the Auto On.
Change the auto on time in the program
setting using the minute and hour
pushbuttons, as you would to set the time of
day. Then turn the function knob to "Auto
On". The LCD will display the current time.
Lift and release the flip switch. The green
light comes on to signal that the
programming function is in use, and the
brewing cycle will begin at the programmed
time. At the programmed time, the green
light will stay on and the red light will come
on, indicating that the brewing cycle is
starting.
To turn off: Depress the flip switch down
and release. Note: To activate the auto-on
feature again for brewing the next day, you
must lift and release the flip switch; the
green auto-on light will turn on.
4. To program the Variable Auto Off:
Turn the function knob to the "Auto Off"
position. Press and hold the "Hour" button
for two seconds, until the clock display
starts blinking. To change the hour and
minutes, use the pushbuttons as you would
to set the time of day. The Auto Off time can
be set from zero to four hours.
5. Decalcification:
Decalcification refers to removing calcium
deposits which form on the metal parts of
the coffeemaker over time.
For best performance from your Brew
Central™ Coffeemaker, decalcify the base
unit from time to time. The frequency
depends upon the hardness of your tap
water and how often you use the
coffeemaker. The flashing Self Clean light will
indicate when you should clean your
coffeemaker.