Cuisinart Brew Central DCC-1200C Series Instruction Booklet page 7

2. Function Knob
For setting time of day, and auto on
time.
a. Auto On
The Auto On feature is used to program
the start time of the brew cycle. The
auto on time can be set for any time,
day or night. The PM indicator is
displayed on the LCD for nighttime
program times.
b. Auto Off
The Auto Off function is used to shut off
the coffeemaker at a pre-set time,
anywhere from 0 to 4 hours.
c. Program Set
The Program Set function is used to set
the time for the Auto On function.
d. Brew
The Brew function is used to start the
brew cycle directly.
e. Clock Set
Used to program the time of day.
f. Audible Tone (not shown)
The Brew Central™ Coffeemaker is
equipped with an audible tone which will
sound 5 times when the coffee has
completed brewing (coffee will continue
to stream from the filter for a few
seconds after tone).
3. Flip Switch
Retro-style flip switch is used to turn
your coffeemaker on and off and works
in tandem with the function knob.
8
2e
2a
2d
6
2c
2b
1
5
7
6
4
3
4. Heater Plate Control Knob
For controlling the temperature of the
coffee after brewing. It has high,
medium and low settings.
5. Hour and Minute Buttons
For use in setting hour and minute for
time of day and auto on time.
6. On and Auto On Indicator Lights
7. Self Clean Setting
Used for removing calcium buildup.
8. 1-4 Cup Setting
For brewing smaller pots of coffee –
it provides double heating of the water,
so coffee is piping hot.
6