Bryant SYSTXBBECN01-A Evolution Connex Owner's Manual page 57

The control will inform you if the connection is successful. If so, touch
S
DONE.
If the connection is unsuccessful, verify that the proper information
d
has been entered before you touch RETRY. The control will go
through the process again.
After your control has connected to the network, go to
S
www.MyEvolutionConnex.Bryant.com to register the unit and begin
remote access. This requires the MAC address and serial number of the
EvolutionR Connext Wall Control, NOT the Wireless Access Point. To
find the serial number and MAC address of the Evolution Connex Wall
Control, click on Menu, Down Arrow, Wireless and View My Evolu-
51
A12117
A12118