Bryant SYSTXBBECN01-A Evolution Connex Owner's Manual page 54

After the control has connected to the network, go to
S
www.MyEvolutionConnex.Bryant.com to register the unit and begin
remote access. This requires the MAC address and serial number of the
®
Evolution
address of the Evolution
Arrow, Wireless and View MyEvolution Info. This screen will provide
the information needed on the MyEvolution website during registration.
When the connection to the MyEvolution web server has been estab-
S
lished, the status screen will show Connected for both Wi- - Fi and the
server.
Connected:
SYSTXBBECW01- -A Models (only)
To establish Wi- - Fi connectivity to the Evolution Connex Control through the
Evolution System Wireless Access Point (TP- - LINKR Device), connect the WAN
(BLUE port) connection of TP- - LINK Wireless Access Point to the home's existing
router LAN port using the provided Ethernet cable. The LAN ports on the back of
the TP- - LINK Wireless Access Point should not be used for other devices. The
Evolution (TP- - LINK) Wireless Access Point should only be used for connection of
the Evolution Connex Control(s) and is not intended to be used wired or wirelessly
with any other devices.
Connext Wall Control. To find the serial number and MAC
®
Connext Wall Control, click on Menu, Down
Not Connected:
48
A13239