Advertisement

Quick Links

Recommendation:
Please read the entire manual before using your new IPPH202.
1 Welcome 2
3 Product Overview .........................................................................................................2
3.1 Key Features ..............................................................................................................2
3.2 Hardware Specifications ...........................................................................................3
1. WELCOME
IPPH 202 is an internet telephone set that features superb audio quality, rich functionalities, high
level of integration, and compactness. By converting analog voice for transmission over the
User Manual
Model: IP Phone 202

Table of Contents

2
4
4
4
4
5
5
5
5
5
6
6
7
18
21
21
4
7
7
8
8
9
17

Advertisement

Table of Contents
loading

Summary of Contents for Tiger IPPH 202

  • Page 1: Table Of Contents

    6.4 Programming Using Keypad 19 7 Test Your Setup 8 Technical Support Contacts 1. WELCOME IPPH 202 is an internet telephone set that features superb audio quality, rich functionalities, high level of integration, and compactness. By converting analog voice for transmission over the...
  • Page 2: What Is In The Package

    IP Phone 202 allows users with broadband internet connections to make calls to and from anywhere in the world. The IPPH 202 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.
  • Page 3: Hardware Specifications

    3.2 Hardware Specification The table below lists the hardware specification of IPPH 202. Model IPPH 202 WAN interface 1 x RJ45 10 Base-T PC interface Available for IPPH 202B Product Color Almost Black or Grey Universal Switching Power Supply Input: 100-240VAC 50-60 Hz...
  • Page 4: Dialing Or Making Calls

    TRANSF Transfer the present call to another number CONF Conference call for three sides FLASH Used to switch between two lines MUTE/DEL Delete the call history, voice message, etc. REDIAL Dial the last called number SPEAKER Enter the hand-free mode Memory Key M1- Under Development 5.2 Dialing or Making Calls...
  • Page 5: Attended Transfer

    Now the speakerphone is activated and you may continue speaking without receiver. 5.4 Call Features Following table shows the new call features of IPPH 202. Call Features Do Not Disturb. When someone call you, “do not disturb” busy tone will be heard.
  • Page 6: Programming Ipph 202

    4) User Password: Assign your own password 6.3 Programming Using Web Browser IPPH 202 has embedded Web server and HTML pages that allow users to configure the IPPH 202 through an easy-to-use Web browser interface such as Microsoft’s Internet Explorer or Netscape...
  • Page 7: Determine Your Voip Device's Ip Address

    If the IP address is all “0”s, then your VoIP device does not have internet connection. Please go back to step 1 and check your installation before proceeding. 6.3.2 User Programming and Configuration From your web browser, the IPPH 202 will show the following login screen: Password: admin 6.3.3 Configuration Options and Explanations...
  • Page 8 Use DNS SRV: Default is No. If set to Yes, then the client will use DNS SRV for server lookup If the IPPH 202 has an assigned PSTN telephone number, then this field should be set to “Yes”. User ID is Phone Otherwise, set it to “No”.
  • Page 9: Audio Settings

    (by choosing “Yes”) and a STUN server address is also specified, then the IPPH 202 will automatically follow the STUN client specifications. Under this mode, the embedded STUN client inside the IPPH 202 will attempt to detect if there is a (and type of) firewall/NAT it is sitting NAT Traversal behind through communication with the specified STUN server.
  • Page 10 G729 or G711 or G726, then the “ptime” value in the SDP message of an INVITE request will be 20ms. If the configured voice frames per TX exceeds the maximum allowed value, the IPPH 202 will use and save the maximum allowed value for the corresponding first codec choice. The maximum value for PCM is 10(x10ms) frames;...
  • Page 11: Other Settings

    Plan Sets the prefix added to each dialed number Prefix No Key Default is 4 seconds. This is the time lapse after entering a phone number for the IPPH 202 to begin Entry completing your call. Timeout This parameter allows users to configure the “#” keyto be used as the “Send / Enter” (or “Dial”) key. If Use # as set to “Yes”, pressing this key will immediately trigger the sending of dialed numbers entered thus far.
  • Page 12: Network Settings

    Other Settings Options Meaning The IP of TFTP server needs to be configured. If it is non-zero or not blank, the IP phone will attempt to retrieve new configuration file or new code image from the specified tftp server at boot time.
  • Page 13 Network Settings Options Meaning If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory) and the IP phone will acquire its IP address from the first Dynamically DHCP server it discovers on the LAN it attaches to.
  • Page 14: Saving The Configuration Changes

    Other Settings Options Meaning This parameter controls how the displayed date/time will be adjusted according Time Zone to the specified time zone. This parameter controls whether the displayed time will be daylight Daylight savings time or not. If set to Yes, then the displayed time will be 1 Savings Time hour ahead of normal time.
  • Page 15: Rebooting The Ipph 202

    The IPPH 202 will then display the following screen to confirm that the changes have been saved. Please wait 5 seconds and then reboot the device. 6.3.5 Rebooting the IPPH 202 You can reboot the IPPH 202 by clicking on the “Reboot” button after each update to the configuration page.
  • Page 16 Show“ 1 dhcp on” Press“ 1 dhcp off”as the current option Press MENU and enter the menu mode Press “+”or“-”to choose Press MENU to save or exit Restart to be effective Show “ 2 IP Addr” Press MENU to show the current IP address If DHCP is OFF enter new IP address Press“+”or“-”...
  • Page 17: Test Your Setup

    Be effective directly. No need to restart. Show “ -- rESEt --”, ATTENTION: A> Enter MAC address and press MENU IPPH 202 will restart and get back to all default setting. All former configuration will be lost. B> Press MENU and the phone will restart.
  • Page 18: Technical Support Contacts

    have specific dialing to recommend. 8. TECHNICAL SUPPORT CONTACTS e-mail: office@alinea.bg...

Table of Contents