Sony GXD-L52H1 Manual page 75

Aspect
Adjust Screen
Notes
• "Adjust Screen" is not available while using the "PAP" function.
• If there is no signal currently being input, none of the "Screen" settings options, except for "PAP Setting" and "Multi Display"
can be selected.
"LED": "On" makes the
continually turned on, and "Off" makes the
continually turned off.
Notes
• "Multi Display" can display an enlarged picture keeping the current "Aspect" setting as
much as possible for video input, and can display an enlarged picture of which "Aspect" is
set to "Full 2" for PC input.
• You can set the "Multi Display" only when the "PAP" function is disabled.
• When "Position" is set to the right-bottom, the
set to "Off". The indicator also lights up even when the display is off (standby), errors are
detected, or the display is in sleep mode including the case of no signal or unsupported
signal.
"Wide Zoom": Select to enlarge to fill screen with minimum distortion.
"Zoom": Select to enlarge the original picture without distorting the aspect ratio.
See page 14.
"Full": Select to enlarge the original picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original source is 16:9
(High definition source), select this mode to display 16:9 picture in original size.
"4:3": Select to display all the pictures in original size to 4:3 aspect ratio..
Tips
• To change from one "Aspect" option to another, you can also use
• Select "Zoom" to display movies and other DVD content with black bands, using the entire
viewable area of the screen.
Notes
• You cannot change the aspect ratio in the "PAP" mode. The picture is displayed in the last
aspect ratio used prior to selecting "PAP" mode.
• You cannot set the "Aspect" while using the "Multi Display" function.
"H Size": Allows you to adjust the size of the picture horizontally. Press G/g and
press to choose a correction.
"H Shift": Allows you to move the position of the picture left and right in the
window. Press G/g and press
"V Size": Allows you to adjust the size of the picture vertically. Press F/f and press
to choose a correction.
"V Shift": Allows you to move the position of the picture up and down in the
window. Press F/f and press
"Reset": Resets all settings of "Adjust Screen" to default settings.
indicator on the front panel (page 7) to be
indicator on the front panel to be
indicator lights up even if "LED" is
to choose a correction.
to choose a correction.
GB
on the remote control.
27
GB