Philips FW-C870 Service Manual page 21

DISMANTLING INSTRUCTIONS
Dismantling of the Cassette Cover
2. Twist screw driver
3. Lift up and out
1. Place screw driver
(flat side) between
the cassette cover
& cassette door
Remove Cassette Cover
Dismantling of the CDC Module and Front Panel
1) Loosen 16 screws to remove the Cabinet Rear (pos 259)
of the set :-
- 5 screws each on the left side & right side of the
Cabinet Rear.
- 6 screws at the rear of the Cabinet Rear.
2) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
3-1
Cassette Cover
Sliding Out The CDC Tray
Dismantling of the CDC Module and Front Panel
3) Remove the Cover Tray CDC (pos 106) as indicated.
4) Loosen 2 screws A and 2 screws B to remove the CDC
Module (pos 1104) as indicated.
5) Remove 1 screw (pos 305) at the bottom to separate the
Front Panel Assembly from the Plate Bottom (pos 236).
3-1
Remove Cover Tray CDC
Front View CDC
Remove CDC Module