Usb Memory (Pf46 Only) - Lincoln Electric PF44 Operator's Manual

USB Memory (PF46 only)

When USB Memory Stick is connected to the USB
Receptacle [21], USB Menu appears on the display.
Figure 52.
The following data can be save on a USB Memory Stick
or loaded from the USB Memory Stick:
Icon
Settings
Configuration Menu (Setup)
All welding programs stored in user
M
memory
One of the welding programs
M1
To save the data on a USB Memory Stick:
Connect a USB Memory Stick to the USB
•
•
Receptacle [21].
Use the Set Control [11] to highlight the Check Mark
•
•
icon.
Figure 53.
Press the Right Button [12] to confirm the USB
•
•
Memory Stick selectrion.
Use the Set Control [11] to highlight the Save icon.
•
•
Figure 54.
English
Description
Press the Right Button [12] to confirm the save on a
•
•
USB Memory Stick.
Create or chose a file in which will be saved copies
•
•
of the data. "+++" mark means a new file.
The display shows the Save Data Menu on a USB
•
•
Memory Stick. In this case, a copy data will be saved
in the file LEB1.WMB.
M5
M6
M7
M
M1 M8
M2 M9
M3
M4
Use the Set Control [11] to highlight the data icon
• •
which will be saved in the file on a USB Memory
Stick. For example: Configuration Menu icon.
M
27
Figure 55.
/LEB1.WMB
Figure 56.
/LEB1.WMB
Figure 57.
English