Samsung TX-P2670WH Owner's Instructions Manual page 17

I
N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the A/B switch.
5
Connect another cable
between the other OUT
terminal on the splitter and
the A–IN terminal on the
RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the ANT A or
ANT B terminal on the rear
of the TV.
After you've made this connection, set the A/B switch to the "A" position for normal view-
ing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B," you will need to tune your TV to the cable box' s output channel, which is
usually channel 3 or 4.)
17