Specification - CDVI CDV47 User Manual

2 wire video system
Table of Contents

Advertisement

15. Specification

● ● Power●supply●for●indoor●monitor:●● ●
● ● Power●consumption:●
● ● Monitor●screen:●
● ● Display●resolution:●
● ● Video●signal:●
● ● Wiring:●
● ● Dimension:●
16. Precautions
1) All components should be protected from shock or vibration, and be careful the
products are not impacted, knocked or dropped.
2) Please clean with a soft cotton cloth, please do not use a chemical cleaning agent. If
necessary, please use a little pure water or dilute soapy water to clean.
3) Image distortion may occur if the video monitor is mounted too close to a magnetic
field eg microwaves, TV's, computers etc.
4) Please do not subject the monitor to wet, high temperature, dust, caustic and oxidation
gas environments, any of which could cause unpredictable damage.
5) Please use the right adaptor which is supplied by the manufacturer, or approved
by the manufacturer.
6) Pay attention to the
trained and qualified professional.
-14-
●●
high voltage
inside the products, please refer service only to a
DC●20~28V●
Standby:●12.4mA●Working:●270mA
7●Inch●digital●color●LCD
800*3(RGB)●x●480●pixels
1Vp-p,●75Ω,●CCIR●standard
2●wires,●non-polarity
225●x●131●x●18mm

Advertisement

Table of Contents
loading

Table of Contents