Installation; Operation - Toastmaster TC17A Owner's Operating And Installation Manual

II. INSTALLATION
IT IS THE CUSTOMER’S RESPONSIBILITY TO REPORT ANY
CONCEALED OR NON-CONCEALED DAMAGE TO THE FREIGHT
COMPANY.
Crumb tray
Legs (4)
slides into opening
thread into holes
in front of toaster
in bottom of
toaster
Note that the return tray extends past the FRONT of
the toaster in the front-exit configuration.
Note that the return tray extends past the
REAR of the toaster in the rear-exit configuration.
Serial
plate
Return tray
slides underneath
toaster
THE ELECTRICAL CONNECTION TO THE TOASTER REQUIRES A
CIRCUIT BREAKER/FUSED DISCONNECT. ELECTRICAL SPECIFI-
CATIONS ARE LISTED ON THE SERIAL PLATE (SHOWN IN FIG-
URE 3), AND IN THE ELECTRICAL SPECIFICATIONS ON PAGE 1
OF THIS MANUAL.
CONSULT ALL APPLICABLE NATIONAL AND LOCAL CODES FOR
FURTHER ELECTRICAL CONNECTION REQUIREMENTS.
Entry rack
hanger rods fit
into holes on
toaster body
Return tray
slides underneath
toaster
III. OPERATION
1. ON/OFF/STBY
2. Adjust
panel
1. Remove
screw
2
WARNING
ENSURE THAT BOTH THE CIRCUIT BREAKER/FUSED DIS-
CONNECT AND THE ON/OFF/STBY KNOB ARE IN THE OFF
POSITION BEFORE PROCEEDING. ENSURE THAT ANY
PACKING MATERIAL RESIDUE HAS BEEN REMOVED FROM
INSIDE THE TOASTING CHAMBER.
2. Conveyor
knob speed control
knob
ON/OFF/STBY knob
Conveyor Speed control knob
Top and Bottom temperature adjustment knobs
3. Top and Bottom
temperature
adjustment knobs