After mounting all the components and connecting the controller to the PC, verify the
operation of Cyber ExerCycle:
Pressing "Z" button on the joystick should make the LED on the controller turn
•
solid green.
Moving the magnet close to the sensor forces the status LED to turn sold green.
•
As you move the magnet away, the status LED should start blinking again.
Open Game Controller Properties and try different controller inputs such as
•
pressing buttons, shaking the joystick. When pedaling you should see the Y Axis
of the display move. (make sure that the controller is setup for Joystick Mode -
see next section)
7