Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
Procedure
1
Using the pull-tabs, disconnect the display cable and I/O cable from the
system board.
1
pull tab
3
I/O cable
computer. After working inside your
base
cover.
wireless
card.
After working inside your
2
display cable
4
system board
35