Advertisement
Quick Links
π H-991
MONARCH 1131
ONE LINE LABEL GUN
CHAnGInG tHE Ink rOllEr
1.
Pull the latches back and swing the cover open
completely. You should hear a click.
NOTE: Do not force the cover past the click
position.
Figure 1
Figure 2
5. Close the cover completely.
PAGE 1 OF 3
1-800-295-5510
uline.com
2.
Hold the labeler sideways
over a trash can while
pushing the button to
release the ink roller.
(See Figure 1)
3.
Hold the new ink roller by
the stem. (See Figure 2)
4.
Slide it onto the post,
snapping it into place.
(See Figure 2)
INSTRUCTIONS
SEttInG PrInt CHArACtErS
1.
Pull the knob until the indicators are on the desired
band.
Figure 3
2. turn the knob until the desired character appears
black on a white background between the
indicators. to print a blank, select the blank space
for that band. (See Figure 3)
3. repeat steps 1-2 for each band.
4. Push in the knob when you are done.
lOAdInG lAbElS
Figure 4
2. For loading a new roll of labels, tear off and discard
the first 10 inches of label and liner.
3. to prevent jamming, peel the first 12 labels from liner
and discard.
1.
Pull the latches back and
swing the cover open
completely. You should
hear a click. (See Figure 4)
NOTE: Do not force
the cover past the
click position.
0612 IH-991
Advertisement
Related Manuals for Monarch 1131
Summary of Contents for Monarch 1131
- Page 1 π H-991 1-800-295-5510 uline.com MONARCH 1131 ONE LINE LABEL GUN INSTRUCTIONS CHAnGInG tHE Ink rOllEr SEttInG PrInt CHArACtErS Pull the latches back and swing the cover open Pull the knob until the indicators are on the desired completely. You should hear a click.
- Page 2 INSTRUCTIONS CONTINUED lOAdInG lAbElS COntInuEd ClEArInG lAbEl jAmS, ClEAnInG And lubrICAtIOn Figure 5 1. Open the cover and remove the label roll. Figure 7 LOOK HERE SUPPLY GUIDE HUBS PEEL BAR LOOK HERE 4. Place the label roll between the hubs and click into place.
- Page 3 CHARACTER KEY π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA 1-800-295-5510 uline.com PAGE 3 OF 3 0612 IH-991...
Need help?
Do you have a question about the 1131 and is the answer not in the manual?
Questions and answers
My label gun is misaligned. How do I make it print in the middle of the label? This is a monarch 1131 from 2024. Thank you
To align the printing on a Monarch 1131 label gun, ensure the labels are loaded correctly. Open the label housing cover, place the label roll so labels wind from the back and over the top, push the roll firmly into place, and pull out 6–8 inches of labels over the roller. Remove a few labels from the liner before feeding it into the advancing mechanism. The print location is fixed and cannot be adjusted, so proper label loading is essential for correct alignment.
This answer is automatically generated
how do I adjust the print head on the monarch 1131. printing is at the seam between labels
The print location on the Monarch 1131 series cannot be adjusted.
This answer is automatically generated