Page 1
7. Attaching a Rechargeable Battery Pack 7.1. Recharging a Rechargeable Battery Pack 8. Syncing the Controller 9. Adjusting the Level of Brightness 10. Entering and Exiting the WildFire EVO Menu 11. Activating Features 12. Pre-installed Features 12.1. Sniper 12.1.1. Configuring Sniper 12.2.
Page 2
• None of the components can be replaced or repaired by users. • Avoid exposing your product to rain, moisture or other liquids to protect against damage The WildFire EVO™ is capable of storing four features at one time. Connecting the WildFire to the product or injury to you.
Before inserting batteries, please refer to the ‘Important Battery Precautions’ information beneath section ‘3’.The WildFire EVO can be powered using regular cell AA batteries or using a rechargeable battery pack as described in the next section. In order to insert regular cell AA...
In order to attach a rechargeable battery pack, please follow these steps: Step 1: Before you can use the WildFire EVO for the first time you need to sync it with your Xbox 360. Whilst pressing and holding the Battery Compartment Button remove the battery To do this, please follow these steps: compartment from the rear of the controller.
12. Pre-installed Features Step 1: Each time you wish to access the WildFire EVO Menu you need to short tap the Home button The WildFire EVO is preinstalled with the features Sniper, Remap, Rapid Fire and Low recoil. on the WildFire EVO controller. For regular access to the Xbox Guides, hold the Home button Each of the pre-installed features is easily identifiable by the following feature images: for over one second.
Right Analogue After entering the WildFire EVO Menu as detailed under section ‘10’, using the A button select Stick Direction Buttons the Sniper feature image to enter the Sniper configuration screen.
The Rapid Fire can be set to operate at different speeds and can be assigned to wide range of buttons. After entering the WildFire EVO Menu as detailed under section ‘10’, using the A button select the Rapid Fire image to enter the Rapid Fire configuration screen. If you would to return to the WildFire EVO Menu at any time press the Back button.
In order to assign Rapid Fire to the Start button and Back button without exiting the Rapid Fire 12.4. Low Recoil configuration screen. You need to press and hold the F1 or F2 button before pressing the Start button and Back button. The Low Recoil feature allows you to set the level of rumble which you feel during gaming.
Xbox 360 is a 100% unofficial product and is NOT sponsored, endorsed or approved by MICROSOFT, This fantastic feature gives you the ultimate freedom to customize the WildFire EVO for how nor any games developer or publisher. Xbox 360 and Xbox Live are registered trademarks or trademarks of MICROSOFT in the United States and/or other countries.
Need help?
Do you have a question about the WildFire EVO and is the answer not in the manual?
Questions and answers