Table of Contents
Advertisement
CONTROLLING YOUR EXTERNAL DEVICE
You can control your external device using this Speaker Unit via Bluetooth.
1. The Bluetooth LED Indicator will stop ashing once your external device is paired.
(See "Bluetooth Connection").
2. Turn ON the music player on your external device and press Play. Or press the
Speaker Unit to play.
3. Just Press the – button to reduce the volume.
4. Just Press the + button to increase the volume.
5. Press the
button to restart the current song or go to a previous song.
6. Press the
button to skip to the next song.
7. Press the
button to pause or play the current song.
1. Recharge the internal battery by inserting the supplied Micro USB Cable into the DC 5V Input port on
the back of the Speaker. Connect the other end to a PC or other charger (smartphone charger) with
5V output (not included). The red charging indicator light will slowly ash while charging. The red LED
light will turn off when the battery charging process is completed. Charging will take up to 5 hours,
depending on charging source.
Note: If the unit has not been used for a long period of time, the rechargeable battery may be discharged
into a "sleep mode." To initialize the battery, it is recommended to charge for longer than 5 hours but DO
NOT exceed 24 hours. Battery life will vary depending on operation. Loud music with heavy bass will
drain the battery faster than spoken word audio.
Caution: The built-in rechargeable battery is not replaceable. Do not remove or replace it, do not throw
in the trash or in a re. Do not dispose device in standard garbage disposal sites. Dispose of device at
available Battery Recycling Sites after fully discharging battery. Not doing so may violate local disposal
laws and regulations. Please refer to local regulations for proper battery disposal.
Unit is not powering ON:
- The Units Battery may be fully drained. Connect the unit to a USB power source to recharge the battery.
Unable to connect to the speaker:
- Check if the Bluetooth LED Indicator is ashing quickly, if not turn the unit OFF, then turn the unit
back ON and reconnect the device.
- Check if the Bluetooth connection is activated on your device. If not, then turn ON your devices
Bluetooth connection. See "Bluetooth Connection" for more help.
The Device is Connected via Bluetooth but there is no sound Playing:
- Check to see if the AUX IN cable is connected. If it is, unplug the AUX IN cable.
- The Bluetooth connection may be out of working distance. Move your device closer (33 feet or 10
meters) so that it is within the proper range.
- Check to see if your Bluetooth enabled device is in playback mode. If it is not, put it in playback mode.
BATTERY CHARGING
TROUBLESHOOTING
5
Play Button on the
Advertisement
Table of Contents
