Turning On / Off The Unit; Playing Audio - it ITSB-352 Instruction Manual

Turning the unit ON:
Press and hold the Power Button for 3 seconds until the unit turns on.
The LED indicator on the back of unit will light up blue and start ashing, a tone will beep indicating the
unit is searching for a bluetooth enabled device.
Turning the unit OFF:
Press and hold the Power Button for 3 seconds until the unit turns off.
LED Function Overview:
When the unit is turned ON it is automatically in Bluetooth mode.
- The Blue indicator will blink quickly, indicating that it is searching for a Bluetooth device.
- The Blue indicator will stay lit, indicating the Bluetooth connection is successful.
- The Blue indicator will blink slowly, indicating the music playback in successful.
When the AUX-IN cable is plugged in, the unit is in AUX-IN mode.
- The Blue Indicator will stay lit.
Bluetooth Connection:
1. Turn ON the unit, the speaker will automatically begin searching for a Bluetooth Device, the Blue
Bluetooth LED Indicator will being ashing quickly.
2. Activate the Bluetooth function on your external device.
3. Select "ITSB-352" on your device to begin pairing. You will hear an audible beep, signifying your device
is paired and the Bluetooth LED indicator will remain Blue for a moment then begin to blink slowly.
4. Begin playing music on your device. You can control playback, pause, next and previous functions on
your connected device or on the speaker itself See "Controlling Your External Device".
If your device asks for password or PIN number, please enter "0000."
If necessary, press the Play/Pause button for 3 seconds to disconnect pairing of Bluetooth function. The
Bluetooth LED indicator will begin flashing after pairing is disconnected.
Note:
- The operational range between this unit and a Bluetooth device is approximately 33 feet (10 meters).
The device will also disconnect when the device is moved beyond the operational range. To
reconnect the device to the unit, place it within the operational range.
- Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of your device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Depending on your external device, operation system, etc, not all buttons and functions will work on
all devices.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- Keep this unit away from any other electronic device that may cause interference.
Aux-In Function:
The apparatus can play music from devices that have 3.5mm Aux-in Socket.
1. Plug the Aux-in Cable into the Aux-in Socket of the apparatus and plug the other end of Aux-in Cable
into the Aux-in Socket of the computer or external device.
2. Turn ON the music player on your external device and press Play.
3. Press the + or - button to adjust volume.
Note: To control the playback please refer to your external device.

TURNING ON / OFF THE UNIT

PLAYING AUDIO

4