Use
Always position your desk fan on a
dry level surface.
1. To tilt the head up or down to the
required position, first loosen the
Position Knob
fan. Angle the head of the Fan then
secure by tightening the Position
Knob
.
2. To engage/ disengage the head
oscillation, push in/pull out the
Clutch Knob
3. Plug
the Desk Fan into a suitable
power socket.
4. The fan is switched on using the
Push Buttons
0 = Off
1 = Low Speed
2 = Medium Speed
3 = High Speed
(JEA54 12" Model Only)
on the side of the
.
on the Base;
Cleaning
To clean the fan body
•
Always unplug the fan before
cleaning or disassembling.
•
Clean using a soft cloth, moistened
with a mild soap solution.
•
Do not immerse fan in water or allow
water to drip into the fan housing.
•
Do not use harsh chemical cleaners.
•
Ensure the fan is completely dry
before further use.
To clean the blade
•
Always unplug the fan before
cleaning or disassembling.
•
Remove the Small Nut and Bolt
•
Open the Guard Grille Retaining
Clips
to remove the Front
Guard Grille
•
Clean the Fan Blade
cloth, moistened with a mild soap
solution.
•
Replace the Front Guard Grille
secure using the Small Nut and Bolt
and Guard Grille Retaining Clips
•
Ensure the fan is completely dry
before further use.
To store
•
Clean and dry the fan thoroughly,
store in the original box.
Desk Fan
.
with a soft
.
and
.