Samsung ML-7000P Service Manual page 44

Screw
Screw
Screw
Screw
In order to remove SMPS, first remove Cover Left.
Use your left hand to release hook from the frame and slide the Cover Left to backward by use of
right hand. After removing Cover Left, you can see the SMPS. Unplug the power connector and
release the wire from the wire guide of the SMPS.
Remove four screws and separate SMPS from the frame.
You can see the fuser AC connector and +5V, +24V connector which are connected to the
microswitches. Detach the wires from the SMPS.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com