Amazon B006TWSUJ6 Operating Instructions Manual page 3

OPERATION
LED STATUS INDICATORS
Power On Paper Overload
(green light) (red light)
ShredSafe™ technology is an added safety feature incorporated in this particular
model. It is a new technology where the shredder is able to detect forced entry
and automatically cuts the power off, preventing further shredding.
To begin shredding, locate the switch on the unit and select the "Auto" mode (FIGURE 2). The
Green LED light indicates the shredder is "On" and ready to use. Press the designated "PUSH
OPEN" area on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3).
The cover will click into a preset position where the "SHREDDER STATUS" indication line
must align with the "READY" setting.
Be sure to NOT tilt the cover completely open beyond the preset position, otherwise the
ShredSafe™ power cut off feature will be activated and the shredder will be inoperable.
The "SHREDDER STATUS" indication line must align with the "READY" setting.
READY: The shredder is currently on STANDBY and ready to operate when paper is inserted.
With the feed slot now exposed, you can shred sheets of paper or 1 credit card per
pass. The green LED light indicates the shredder is "ON" and ready for use.
DISABLED: The safety feature has been activated. All power to the SHREDDER IS CURRENTLY
SHUT OFF AND WILL NOT OPERATE until the cover is returned to the "READY" setting.
The cover has been completely tilted beyond the safe position.
When shredding is completed, you can press the designated "PUSH CLOSE" area on the cover
to tilt shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed
when shredder is not in use to prevent any objects from accidentally getting into the feed slot.
CONTINUED NEXT PAGE
4 ENGLISH
Shredder Overheat Shredder Not Aligned
(red light) (red light)
OPERATION
Features a CD/DVD Shredder:
Do not hold CD/DVD with finger through the center ring
while feeding into the shredder. Serious injury may occur.
Never feed more than one credit card or CD/DVD at a time.
1) Hold the CD/DVD by the edge and feed one at a time,
releasing when shredding begins.
2) Shredder will stop when the entire disc has been destroyed.
Never shred large paper clips, window or insulated envelopes, continuous forms, newsprint,
bound pages (in example: notepads, checkbooks, magazines, etc...), transparencies,
laminated documents, cardboard, any items with adhesives, hard materials or plastic
(except Credit Cards and CDs).
This shredder will shred staples and small paper clips. It is recommended that you remove paper
clips whenever possible to extend the lifespan of your shredder.
Only shred credit cards by feeding them vertically into the middle of the entry, releasing
when shredding begins. Never feed more than one credit card at a time. DO NOT ACTIVATE
REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS and CDs.
Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the
cutting blades and internal components.
Overheating with extended use: In the event that the shredder had shred continuously beyond
the maximum running time and overheated, the unit will automatically shut off. If this happens,
switch the shredder off for 30 minutes or longer before resuming normal operation.
ENGLISH 5