Allation; Tion; Removing The Base Stand; Mounting On The Wall - TruTech PVS2119 Manual

INST INST ALLA ALLA

TION

TION
INST ALLA ALLA TION TION
INST INST ALLA TION

REMOVING THE BASE STAND

REMOVING THE BASE ST REMOVING THE BASE ST
REMOVING THE BASE ST REMOVING THE BASE ST
WARNING: The LCD Display is very fragile, and must be protected at all
times when removing the base stand. Be sure that no hard or sharp, or
anything that could scratch or damage the LCD display, come in contact
with it. Do NOT place pressure on the rear of the unit at any time because
the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making
sure to place a soft cushioned material (such as a pillow or thick piece
of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the TV.
MOUNTING ON THE W

MOUNTING ON THE WALL

MOUNTING ON THE W
MOUNTING ON THE W MOUNTING ON THE W
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-
compliant 3.9" x 3.9" (100mm x 100mm) mounting kit designed for flat-
panel TVs (sold separately). Mount this unit according to the directions
included with the mounting kit.
AND AND AND
AND
ALL ALL ALL
ALL
17