Figure D-2: Attaching The Brackets To The Router And Rack-Mounting The Router - Linksys RV082 User Manual

10/100 8-Port VPN Router
Line up the bracket holes with the holes in the Router and attach with the screws, using four on each side of the
Router. After the brackets are attached to the Router by screws, you can rack-mount it. Attach the Router to the
rack as shown below in Figure D-2, with two screws on each side.

Figure D-2: Attaching the Brackets to the Router and Rack-Mounting the Router

Appendix D: Physical Setup of the Router 80
Setting up the Router