Trouble Shooting - Tefcold BLC3 User Manual

5.TROUBLE SHOOTING

The information shown below aims to help with the identification and correction of any anomalies and
malfunctions which could occur during use. Some of these problems can be resolved by the user. For the
others, precise skill is required and they must therefore only be carried out by qualified staff.
Problem
The refrigerator unit does not
start
The refrigerator unit functions
continuously, cooling
insufficiently
The refrigerator unit does not
stop
Presence of ice inside the
evaporator
Appliance noise
Causes
No voltage
Other causes
Room too hot
Dirty condenser
Insufficient door sealing
Insufficient quantity of
refrigerant gas
Condenser fan at a standstill
Evaporator fan standstill
Probe faulty
Circuit board fault
Persistent vibrations
8
Solutions
Check the power supply cable
Check fuses
Check the correct connection of
the appliance
If the problem persists,
contact the after-sales centre
Air the environment
Clean the condenser
Check the gaskets
Contact the after-sales
centre
Contact the after-sales
centre
Contact the after-sales
centre
Contact the after-sales
centre
Contact the after-sales
centre
Carry out a defrosting cycle
possibly with the door open
If the problem persists,
contact the after-sales centre
Check there is no contact
between the appliance and
other objects inside or outside