Upgrading Memory
4
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
5
Push the memory module down so that it is completely fi xed.
If the memory does not fi t easily, push the memory module
down while pulling the memory module latches outward.
Memory Slot
6
Close the memory compartment cover and fasten the screw.
Removing a memory module
Pull the memory module latches outward.
The memory module will pop up.
Remove the memory module out at an angle of 30 degrees.
Chapter 3.
85
Settings and Upgrade