Connecting an External Display Device
Connecting through the HDMI port (Optional)
By connecting the computer to a TV with a HDMI port, you can
enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to confi gure the
screen and sound.
1
Connect the HDMI cable to the HDMI port of the TV.
External
Monitor
•
This is only supported for models that support a TV output
port (HDMI).
•
When a TV provides more than one HDMI port, connect
the computer to the DVI IN port.
•
When connecting the computer to a TV, switch the
external input mode of the TV to HDMI.
TV
Projector
2
Press the
+
Display Manager screen appears where you can select a
display device.
Since pressing the
changes the selection, select a display device.
HDMI
LCD + HDMI Clone
LCD + HDMI DualView
•
External Monitor / TV is not supported in the DOS
Command Prompt window.
•
Simultaneous output to all 3 (LCD + CRT + HDMI) is not
supported.
•
If the screen is not switched even if you press the
+
key combination, you have to install the Easy
Display Manager program.
Chapter 2.
Using the computer
key combination once. Then the Easy
key while holding down the
53
key