Panel Descriptions; Front Panel - Roland F-120 R Owner's Manual

& &

Panel descriptions

Front Panel

[Metronome] button
This sounds the metronome (p. 9).
To sound the metronome
To change the tempo
To change the time signature
[Volume] knob
This adjusts the volume.
Tone [Piano] and [Other] buttons
Use these buttons to select tones (p. 9) or adjust the manner in which they are sounded (p. 12).
To select grand piano and
ensemble tones
To select other tones
To enable or disable Twin Piano
mode
4
Turn on the [Metronome] button.
Turn on the [Metronome] button to display the
tempo, and then press the [–] [+] buttons.
Hold down the [Metronome] button and press
the [–] [+] buttons.
Press the [Piano] button. Press the [–] [+]
buttons to list and select them.
Press the [Other] button. Press the [–] [+]
buttons to list end select them.
Hold down [Piano] and press the [Other]
button.
[Split] button
This button allows you to split the keyboard in two halves:
the left half is then used to provide the Rhythm function with
chord information, while the right half allows you to play
melodies (p. 17).
[Transpose] button
This button is used to changed the pitch of the notes you
play on the keyboard and of the songs you play back (p. 10).
To change the key of
the keyboard and song
playback
To switch transpose off/on Press the [Transpose] button.
[Split] + [Transpose] button: Function mode
Holding down [Split] while pressing [Transpose] allows you to
select the F-120R's Function mode (p. 21).
Hold down the [Piano] button and press the
To adjust the reverberation
[–] [+] buttons.
Hold down the [Other] button and press the
To adjust the brightness
[–] [+] buttons.
Hold down the [Transpose]
button and press [–] [+] to set
the transpose interval.