TruAudio B23 series User Manual

User Manual - B23 Series - In-Wall Theater Speaker
Description:
The idea behind the new B23 speaker line was
to build a truly
loudspeaker that could be retrofit in a wall.
The B23 not only has a stunning look, but
also has stellar performance.
In order to produce a Tru high fidelity full
range speaker, a
selected. A three way design allows the use
of the proper size component for each band of
frequencies for playback.
At the high end of the frequency spectrum, a
Titanium diaphragm tweeter was selected for
a Tru-to-life dispersion pattern that most
closely resembles the
moves. This tweeter material allows the
tweeters to be played at the proper level,
without the listener
fatigue. This is especially important for
the high volumes at
playback often occurs.
neodymium motor was
allows the tweeter to be compact enough to be
in a swivel mount. This allows the installer
to place the speaker where it would go in a
real world application, but also aim the
tweeters so that the listener experiences
them on axis where their response is best.
A 6.5" carbon fiber midrange was selected
because of its balance of the many factors
that must be considered when choosing a
midrange driver. This single piece cone has
good dispersion in the usable band.
the cone size was important in considering
cone breakup, which is a form of distortion
that occurs at lower frequencies in larger
high performance
three way design
way natural sound
experiencing
which home theater
Also, the tweeter's
selected because
Also,
cones. The woven carbon fiber cone material
was chosen because it is very stiff, limiting
cone breakup in the usable band.
very light, which helps reduce the weight of
the moving assembly.
qualities, a midrange speaker was produced
with good dispersion in the usable band with
very little breakup, and is sensitive enough
was to have
accuracy.
Because this is a three-way in-wall speaker,
the limited depth would not allow the use of
a conventional woofer driver.
was to use three 6.5" woofers instead of a
single 10" woofer.
necessary output to balance with the rest of
the system, while playing low enough to be
truly full range, all while maintaining a
ear depth that still fits in a standard 2 x 4
wall.
This high performance full-range loudspeaker
it needs the retrofit able back box in order to
control the
operates in, sold with the speaker.
midrange speaker
integrated with in the speaker to optimize
its performance and control its resonance.
The B23 cabinet is designed to allow the
woofers the exact amount of air space they
need to balance their output perfectly.
It is very difficult to get true full-range,
high quality sound out of a speaker that fits
in a standard wall.
industry has been struggling with for years.
The B23 series has accomplished this: Tru
high fidelity in the wall.
By balancing these
incredible dynamic
This would give the
amount of air
has its own
This is a problem the
It is also
range and
The solution
the speaker
The
enclosure