Advertisement
LCD Programmable Timer 630-0892 Operation
LCD Programmable Timer
(630-0892)
Setting The Time and Day
Follow these steps to set the current time and day.
1.
Slide RUN/PROG/TIME SET to TIME SET.
2.
Press HOUR to set the hour digits. Pressing and holding down HOUR rapid-
ly advances the hour digits.
NOTE:
P appears to the left of the hour digits to indicate P.M. hours.
3.
Press MIN (minute) to set the minutes digits. Pressing and holding down
MIN rapidly advances the minute digits.
4.
Press DAY until the correct day abbreviation appears.
5.
Slide the RUN/PROG/TIME SET switch to RUN.
the clock is running.
NOTE:
Keep this switch set to RUN to prevent accidentally changing the
time.
Setting The Timer
The timer has 14 settings (1-14).
turn on the appliance and even numbered settings specify a time to turn off
the appliance.
Follow these steps to set your timer.
1.
Slide the RUN/PROG/TIME SET switch to PROG. The display shows the first
setting.
shown in the illustration.
2.
Press Event to select a setting to enter or change.
3.
Press Hour to set the HOUR digits and press MIN to set minute digits to
the correct time.
NOTE: Be sure P appears to the left of the hour digits when you want to
set a P.M. hour.
4.
Press Day to select the day of the week for this setting.
If you want the setting to apply to every day of the week, repeatedly
press DAY until all day indicators appear on the display.
5.
When you finish entering the setting, press EVENT. The timer advances to
the next setting.
6.
Repeat Steps 3 through 5 to enter additional settings.
NOTES: Be sure to set the timer to turn off the appliance.
ance remains on as long as there is power if you do not set a
time for the appliance to turn off.
To replace an existing event, select its setting number and set
the new event time.
1 of 2
Operation
If you have not entered any setting, the display appears as
http://support.radioshack.com/support_supplies/doc17/17153.htm
Faxback Doc. # 17153
The colon flashes to show
Odd numbered settings specify a time to
The appli-
11/23/2012 4:38 AM
Advertisement
Table of Contents
Related Manuals for Radio Shack 630-0892
Summary of Contents for Radio Shack 630-0892
- Page 1 LCD Programmable Timer 630-0892 Operation http://support.radioshack.com/support_supplies/doc17/17153.htm LCD Programmable Timer (630-0892) Operation Faxback Doc. # 17153 Setting The Time and Day Follow these steps to set the current time and day. Slide RUN/PROG/TIME SET to TIME SET. Press HOUR to set the hour digits. Pressing and holding down HOUR rapid- ly advances the hour digits.
- Page 2 LCD Programmable Timer 630-0892 Operation http://support.radioshack.com/support_supplies/doc17/17153.htm To clear an event, select its setting number and press CLEAR twice. Be sure to clear both the on time and the off time for an event. If you set the timer to turn on the appliance every day, be sure to also set the timer to turn off the appliance every day.
Need help?
Do you have a question about the 630-0892 and is the answer not in the manual?
Questions and answers