Appendix; Troubleshooting - Sanyo PLC-XU301 Owner's Manual

Appendix

Troubleshooting

Problem:
No power
The initial display is not shown.
The initial display is not same
as the default set.
Input signal switches automatically.
(or does not switch automatically)
When the projector is on and you
press the input button, an icon
other than the Lamp mode icon
appears
An icon other than Input mode or
Lamp mode icon appears.
Image is out of focus.
Image is Left/Right reversed.
Image is Top/Bottom reversed.
Picture is not bright enough.
64
Off Countdown off
User Off
Contrast Brightness
Image mode