Planning The Installation - Infinity ERS 840 Installation Manual

Speaker And
Frame Assembly
Figure 1. Drawing shows assembly procedure (ERS 840 is shown).

Planning the Installation

When surveying potential installation sites for ERS Series
speakers, keep the following points in mind:
• Allow at least a two-inch clearance in all directions behind the
wallboard. The assembly is designed for easy horizontal or
vertical mounting between wall studs.
NOTE: Due to its size, the ERS 840 can only be mounted vertically.
It will not fit horizontally between standard 16" stud-centers.
• For the best stereo image, position the speakers not less than
seven to ten feet apart.
2
x
M a
M in
Grille
Infinity Logo