LG L172WT Manual page 30

Selecting and Adjusting the Screen
Selecting the options
LANGUAGE
IMAGE
SIZE
OSD
POSITION
TRANS
-PARENCY
ZOOM
RESET
The "IMAGE SIZE" and "ZOOM" menus are disabled at the recommended higher resolution
Note
(780p) when the input signal is HDTV.
The 'ZOOM' menu will be disabled when the screen size is 4:3, spectacle or 1:1, or
PIP/POP/PBP is activated.
To choose the language in which the control names are
displayed.
To select the image size of the screen.
(FULL/4:3/SPECTACLE/1:1)
To adjust position of the OSD window on the screen.
Press the button to display the submenu for OSD
POSITION.
Left
Right
Up
Down
To adjust the transparency of the OSD menu screen.
Use this function to zoom in the screen. When you turn the monitor
off and on again, the default screen size will be restored.
Press the button to display the submenu for OSD
POSITION.
* If the zooming value is set to '0', vertical
and horizontal positioning cannot be
adjusted.
Use this function to reset the monitor to the factory default.
However, language selection will not be initialized.
A29
Moving the OSD screen position horizontally.
Moving the OSD screen position vertically.