Connecting to External Devices
Turn on power by pressing the power button on the monitor.
A
Turn on the PC.
B
Select an input signal.
Press the Input Select button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
When connecting with a DVI-D signal input cable.
A
• Select DVI DIGITAL: DVI-D digital signal.
When connecting with a DVI-A signal input cable.
B
• Select DVI ANALOG: DVI-A analog signal
Note
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Power button
DVI
A13