Dynamic Laser Cruise Control - Toyota Avalon 2010 Quick Reference Manual

Hide thumbs Also See for Avalon 2010:
Table of Contents

Advertisement

Dynamic Laser Cruise Control (if equipped)
Refer to the Owner's Manual for more details and complete safety
precautions before attempting to use "Dynamic Laser Cruise Control."
Fixed speed mode
(1) To select conventional/fixed speed control Push the ON-OFF button.
Push the lever forward and hold until the "NORM." indicator appears.
(2) To set, cancel and resume a speed Refer to instructions for Cruise
Control on the previous page.
Distance control mode
Distance control mode will cruise at a set speed, decelerate to maintain
selected distance from a slower vehicle traveling in front of you, and
accelerate back up to the selected speed if the vehicle in front of you
changes lanes or speeds up.
(1) To select distance control mode Push the ON-OFF button. The
"READY" and "CRUISE" indicator will come on.
(2) To set, cancel and resume a speed Refer to instructions for Cruise
Control on the previous page.
NOTE: Once vehicle speed is set, pushing lever up toward "+ RES" will
increase speed to the nearest 5 mph, and then in 5 mph increments.
Pushing lever down toward "- SET" will reduce speed in the same way.
(3) To change the vehicle-to-vehicle distance
Push the distance button to cycle through the settings, which will
change progressively from LONG to MIDDLE to SHORT.
LONG
MIDDLE
SHORT
I n f o r ma t i o n P r o v i d e d b y :
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents