Note
•
If you change a setting, make sure that the TV supports
the new setting.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
[Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
[HDMI audio]: Set an HDMI audio format
•
when this player is connected through
HDMI.
[Digital audio]: Select an audio format
•
for the sound output when this player is
connected through a digital connector
(coaxial).
[PCM downsampling]: Set the sampling
•
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby
Dolby
Digital Plus encoded DVD and Blu-ray discs.
®
Network (installation, status...)
1
Press .
2
Select [Setup] > [Network] to access the
network setup options.
[Network installation]: Start a wired
•
installation to make the network work.
[View network settings]: Display the
•
current network status.
EN
8
TrueHD /
®
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
[Menu language]: Select an onscreen
•
display menu language.
[Audio]: Select an audio language for video.
•
•
[Subtitle]: Select a subtitle language for
video.
[Disc menu]: Select a menu language for a
•
video disc.
•
[Parental control]: Restrict access to discs
that are encoded with ratings. Input "0000"
to access the restriction options. To play all
discs irrespective of the rating, select level
"8".
•
[Screen saver]: Enable or disable screen
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity (for
example, in pause or stop mode).
[Auto subtitle shift]: Enable or disable
•
subtitle shift. If enabled, the subtitle position
is changed automatically to fit the TV
screen (this feature works with some
Philips TVs only).
[Change password]: Set or change a
•
password to play a restricted disc. Input
"0000" if you do not have a password or if
you have forgotten your password.
[Auto standby]: Enable or disable auto
•
standby. If enabled, the player switches to
standby after 18 minutes of inactivity (for
example, in pause or stop mode).
[VCD PBC]: Display or skip the content
•
menu for VCD and SVCD.
•
[Auto play disc]: Enable or disable the
automatic disc playback after power on.
[Auto play after video]: Enable or disable
•
sequential playback of videos from USB.