HUSTLER Super Z HD General Service Manual page 22

Table of Contents

Advertisement

Prefill
pump
here
Right side pump
Left side pump
Figure 4-25
to half throttle and stroke the steering control lever
forward and reverse several times until the wheel motor
operates smoothly through the entire speed range.
13. IMPORTANT: With the engine off, disconnect the two
female spade connectors from each other (from step #3)
and reconnect them to the seat switch. This must be
completed so that the safety circuit is functioning
properly. Figure 4-26 & Figure 4-27
REV C
Do not operate the mower without plugging the mower's
wiring harness into the seat switch. This switch is an
important part of the safety start interlock system. Serious
injury can result if the seat switch is not plugged into the
mower's wiring harness.
Never operate the mower with a non-functioning seat
switch. Always reconnect the seat switch to the mower
harness.
Prefill
pump
here
14. Check to make sure all tools or obstructions are removed
4-10
WARNING
WARNING
Seat
switch
Mower
harness
Figure 4-26
Mower
harness
Figure 4-27
Female
spades
Female
spades
117592

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents