Table of Contents
Advertisement
6 .
Important notes on the motherboard power requirements
1 - 2 8
Downloaded from
www.Manualslib.com
ATX power connectors (24-pin EATXPWR1,
4-pin
ATX12V1)
These connectors are for ATX power supply plugs. The plugs from the
power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
®
P5GD1-FM
P5GD1-FM ATX power connectors
•
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
To power the motherboard, it is recommended that you use an ATX 12 V
Specification 2.0 power supply unit (PSU) with a minimum 350 W power
rating. This PSU type has a 24-pin and 4-pin ATX power plugs.
manuals search engine
EATXPWR1
ATX12V1
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
Ground
+5 Volts
Ground
+5 Volts
Ground
+3 Volts
+3 Volts
Chapter 1: Product introduction
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
Advertisement
Table of Contents
