Homelite UT21566 Operator's Manual page 10

ATTACHING THE FRONT HANDLE
See Figure .
 Loosen and remove the wing nut, washer, and bolt from
the handle.
 Install the handle on the drive shaft housing at the loca-
tion indicated by the label on the shaft.
 Adjust handle up or down, if necessary, to desired operat-
ing position.
 Reinstall the bolt, washer, and wing nut. Tighten wing nut
to secure.
ATTACHING THE GRASS DEFLECTOR
See Figure .
WARNING:
The line cutting blade on the grass deflector is sharp.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
 Remove the bolt, washer, and wing nut from grass
deflector.
 Press the grass deflector onto the bottom of the curved
shaft as shown.
 Insert the bolt through the grass deflector and the bracket
on the curved shaft.
 Place the washer on the bolt.
 Place the wing nut on the bolt and tighten securely.
ASSEMBLY
wING NUT
wASHER
Page 10
FRONT HANDLE
BOLT
wASHER
BRACkET
wING
NUT
Fig. 4
GRASS
DEFLECTOR
BOLT
Fig. 5