Panasonic DMR-BWT850 Operating Instructions Manual page 13

Main unit
Display

Pull to flip down the
front panel.
1 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2 Open/close disc tray
3 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Disc

USB memory
4 Disc tray
5 USB port
6 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
 
 
SD card
Display
1 2 3 4
COPY USB
HDD
SD
BD
1 Drive (HDD, BD or SD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 SD card slot indicator
6 Remote control signal indicator
7 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
8 Main display section indicator
• Messages and other information are
displayed. ( 91)
9 Playback indicator
10 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
Getting started
5 6 7
SD
PLAY
8 9 10
SQT1119
13