In-Call Options - Sharp aquos crystal User Manual

In-call Options

While you're on a call, you will see a number of onscreen options. Touch an option to select it.
End call: End the current call.
n
Dialpad/Hide: Toggle the appearance of the onscreen dialpad.
n
Receiver: Route the phone's audio through the receiver
n
Touch to route the phone's audio through the speaker. (You can adjust the speaker
l
volume using the Volume Up/Down Button.)
Touch again to use the phone's receiver.
l
Warning: Because of higher volume levels, do not place the phone near your ear during speakerphone use.
Bluetooth: Route the phone's audio through a connected Bluetooth headset, through the
n
speaker or through the receiver. Appears instead of the Speaker icon when your phone is
connected to a Bluetooth headset.
Touch the Bluetooth icon for a menu to switch between Speaker, Handset earpiece
l
(receiver), and Bluetooth.
When Bluetooth or the Bluetooth headset is turned off, the call is routed through either the
l
receiver or speaker.
Note: The Headset button is activated to show the current call is routed to a connected Bluetooth headset.
Mute: Mute the microphone during an active call. Touch again to unmute the microphone.
n
Phone Calls
or through the speaker .
37