Wi-Fi Direct - Sharp aquos crystal User Manual

Network notification: When enabled, your phone alerts you when a new Wi-Fi network is
l
available.
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data for data
l
communications, when the device goes to sleep (when the backlight goes out). This setting
can affect data usage, since the data connection will remain active even when the phone
screen is off.
Scanning always available: When enabled, your phone will allow Google location service
l
and other apps to scan for networks, even when Wi-Fi is turned off.
Avoid poor connections: When enabled, your phone does not use a Wi-Fi network when
l
there is a poor connection.
Install certificates: If you have certificates stored on an installed optional memory card
l
(not included), you can use this option to install the certificates.
Wi-Fi optimization: Enable your phone to use as little battery as possible when using Wi-
l
Fi.
MAC address: View your device's MAC address, needed for connecting to some secured
l
networks.
IP address: View your device's IP address.
l

Wi-Fi Direct

Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an
access point or via the Internet.
1. Touch
> > Settings
2. Touch the Wi-Fi slider to turn Wi-Fi on
of in-range Wi-Fi networks.
To disable Wi-Fi, touch the slider again
l
3. Touch
> Wi-Fi Direct.
Wi-Fi Direct and Wi-Fi are unavailable at the same time.
l
4. Touch a device with which to connect.
If you cannot find the device you want to connect to, touch SEARCH FOR DEVICE.
l
If connected via Wi-Fi, you will see a confirmation. Follow the onscreen instructions.
l
Touch RENAME DEVICE to rename your phone name as it appears on the other device.
l
5. Accept the connection on the other device.
Web and Data
> Wi-Fi.
. You will see the names and security settings
.
97