Advertisement
IMPORTANT: In order to maximize power, the unit should be fully charged
for at least 24 hours before initial use.
Charging
1.
Set "ON/OFF" switch into the "OFF" position.
.
Set unit into charging base.
3.
Ensure that the indicator light is on. If it is not, please retry steps 1 & .
4.
After the initial charge, the vacuum will require 8–1 hours for a full charge.
5.
The vacuum will run for roughly 15 minutes on a full charge.
Before Use
•
While charging, make sure the indicator light is on. In order to maximize
the suction power, the vacuum should be fully charged for at least 4 hours
before first use.
•
Empty the Dust Bin compartment regularly if you have vacuumed dust.
•
Store the vacuum cleaner in a clean, dry area when not in use.
Vacuuming Liquids
1.
Before vacuuming liquids, empty the Dust Bin compartment.
.
Place the vacuum vertically, keep the nozzles downward and check the
liquid level.
3.
Never Point the nozzles upward with liquids to prevent leaking.
4.
It is recommended to empty the Dust Bin compartment immediately when the
liquid level reaches the "Max" line. If the compartment contents exceed this
Wagan and wagan.com are trademarks used by Wagan Corporation
User's Manual—Please read before using this equipment
©2009 Wagan Corporation
All Rights Reserved
3
Advertisement
