Lighting Instructions - Napoleon PRO285 User Instructions

Hide thumbs Also See for PRO285:
Table of Contents

Advertisement

Lighting Instructions

WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the gas supply valve.
2. Push and turn any main burner control knob slowly to the 'hi' position. This action will ignite the
3. If the burner does not ignite, then immediately turn the control knob back to the 'off' position and
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off' position and wait 5
minutes for any excess gas to dissipate, either repeat steps 2 and 3 or light with a match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit match
down through the grill while turning the corresponding burner valve to high.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
Burner Control
Main Burner Lighting
1. Open grill lid
selected burner.
repeat step 2 several times.
11
www.napoleongrills.com

Advertisement

Table of Contents
loading

Table of Contents