Firefly OL2804 Instruction Manual

Electric patio heater

Advertisement

Unpack the Electric Patio Heater making sure that all the items
are present and that there are no components left in the box and
that the heater head is free from any packing material.
Using the detailed drawing follow the three steps to assemble
your halogen heater.
Do not connect the Electric Patio Heater to the electrical supply
until all the assembly is complete.
Instruction Manual
Do not connect the halogen heater to the electrical supply if any
Electric Patio Heater
of the components or the power cord is damaged in any way.
If in doubt contact your supplier.
OL2804
If in doubt contact your supplier.
If in doubt contact:
Primrose London
info@primrose.co.uk
Tel:0118 9035210(UK)
Tel:0044 118 9035210(outside of UK)
Please read these instructions carefully before using your
new Electric Patio Heater

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OL2804 and is the answer not in the manual?

Questions and answers

Mamoun
May 29, 2025

Hi there I have 6 heaters of the OL2804 and I need some of the heaters tubes elements, any chance you could put me in the right direction please

1 comments:
Mr. Anderson
May 29, 2025

You can find a spare replacement 650W bulb for models OL1850, OL1822V2, and OL2410V2, priced at £14.99. However, there is no specific mention of a replacement tube element for model OL2804. Therefore, based on the provided information, replacement tube elements for Firefly heater model OL2804 are not listed.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Firefly OL2804

  • Page 1 Do not connect the halogen heater to the electrical supply if any Electric Patio Heater of the components or the power cord is damaged in any way. If in doubt contact your supplier. OL2804 If in doubt contact your supplier. If in doubt contact: Primrose London info@primrose.co.uk...
  • Page 2 Assembly Instruction Step one: Unpack the Electric Patio Heater making sure that all the items are present Step two: Place the Heater Mounting Part A on a Pole which diameter 25mm – 60mm. is between Step Three: Slip the Mounting Part B and fit it to the Mounting Part A from the bottom up.
  • Page 3 Step 4: When start using the heater, just holding the little handle by the end of the heater and push up. Step 5: When finish using the heater, please a) Right hand push up the heater b) Left hand press the little silver knob to the end c) Right hand push down the heater.
  • Page 4 Operation 1. This appliance is not intended for use by person (including Connect the power cable to a 13 ampere supply that is located in a children) with reduced physical, sensory or mental safe, dry area. capabilities, or lack of experience and knowledge, unless 1.
  • Page 5 14. Don’t place the unit closed to curtains, or other combustible 33. One or two dark points may exist on the surface of the materials. Otherwise there will be a danger of catching fire. heating elements during the first few minutes after it is 15.

Table of Contents