Section Four The Amiga Dual Drive - Power Computing ATARI PC720 Owner's Manual

Section Four
The Amiga Dual Drive
The Power Dual Drive for the Amiga gives you the benefit of two exter-
nal floppy drives in one compact case. The unit has its own power sup-
ply so that power is not drained from the Arniga 500. The two external
drives are independent and copying operations can be carried out bet-
ween the computer and either drive or from one drive to another. Both
drives possess the unique Power Anti-Click feature so that they do not
click when empty. The dual drive is compatible with Arniga 500, 1000.
2000. 1500 machines.
Installation Instructions
1. Switch off your Amiga and all its peripherals.
2. Switch the isolating switch (located on the rear of the drive) to
position 1
3. Connect the disk drive's connector to the drive socket on the back
panel of your Amiga. The plug will only fit one way into the socket.
Tighten the screws on the connector to the computer back panel.
4. Plug the drive into the mains and turn on using the large switch
5. Once the Workbench screen has booted from your internal drive,
place a disk in either of the external drives, and a drive icon will appear
on the Workbench. If no Icon appears, and the drive LED fails to light.
SWITCH O F F your Amiga and peripherals, reverse the position of the
isolating switch (located on the rear of the drive), and repeat steps 3-5.
Note:
a) NEVER remove a floppy disk from the drive while the drive light is on
-
you may damage the disk or lose information on it.