Samsung Galaxy S4 GT-I9515 User Manual page 86

Media
Controlling the camera remotely
Set a device as a viewfinder to control the camera remotely.
→ → Remote viewfinder, and then connect the device and the camera using
Tap
Wi-Fi Direct or NFC. Tap
Configuring settings for Camera
→
Tap to configure settings for Camera. Not all of the following options are available
in both still camera and video camera modes. The available options vary depending on the
mode used.
• P hoto size / Video size: Select a resolution. Use higher resolution for higher quality. But it
takes up more memory.
• B urst shot: Take a series of photos of moving subjects.
• F ace detection: Set the device to recognise people's faces and help you take photos of
them.
• M etering modes: Select a metering method. This determines how light values are
calculated. Centre-weighted measures background light in the centre of the scene. Spot
measures the light value at a specific location. Matrix averages the entire scene.
• I SO: Select an ISO value. This controls camera light sensitivity. It is measured in film-
camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are
for fast-moving or poorly-lit objects.
• A nti shake / Video stabilisation: Activate or deactivate anti-shake. Anti-shake helps
focus when the camera is moving.
• A uto night detection: Set the device to automatically detect darker conditions and
adjust the brightness of the photo without the flash.
• S ave as: Set the device to delete the original photo when taking photos with rich tone
mode.
to take a photo remotely using the device as a viewfinder.
86