Table of Contents
Advertisement
BX2000+
1. INTRODUCTION
1.1. PREFACE
Welcome to use the BX2000+ motherboard. It is a Pentium ® II / III / Celeron
Processor based PC / AT compatible system with AGP / PCI / ISA Bus, and
has been designed to be the fastest PC / AT system. There are some new
features allow you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and
how to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
Intel Pentium ® II / III / Celeron Processor based PC / AT compatible main
q
board.
Slot 1 supports Pentium ® II / III / Celeron processor running at 233-800
q
MHz.
q
Intel 440BX chipset, Supports AGP / SDRAM / Ultra DMA/33 IDE / Keyboard
and PS/2 Mouse Power On / ACPI features.
q
Supports 4xDIMMs using 3.3V SDRAM DIMM module.
Supports Intel LDCM ® Network Manageability.
q
q
Supports 8 MB – 1GB SDRAM memory on board.
q
Supports ECC or Non-ECC type DRAM module.
q
1xAGP slot, 6xPCI Bus slots, 1xISA Bus slots.
q
Supports 2 channels Ultra DMA/33 IDE ports for 4 IDE Devices.
q
Promise Chipset supports 2 channels Ultra DMA66/33 IDE Port for 4 IDE
Device.
q
Supports 2xCOM (16550), 1xLPT (EPP / ECP), 1x Floppy port.
q
Supports 4xUSB ports (Front Panel USBx2, Back Panel USBx2), 1xPS/2
Mouse & 1xPS/2 Keyboard.
q
Licensed AWARD BIOS, 2M bits FLASH ROM.
1-1
Advertisement
Table of Contents
