Table of Contents
Advertisement
BX2000+
A.5 Notices & Limitations:
1.
In order for STR to function properly, several hardware and software
requirements must be satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification
(provide more than 720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2.
Jumper JP16 is provided to connect to the STR LED in your system
chassis. [Your chassis may not provide this feature.] The STR LED will
be illuminated when your system is in STR sleep mode.
Backup
BIOS
3.
The following is a listing of popular peripherals which have been
successfully tested, on an individual basis, to function correctly in an STR
environment. NOTE: All combinations of these peripherals have NOT
been tested and therefore we do not warrant any particular combination.
A.
VGA Card:
(1)
AGP:
Driver Ver.:
Main
BIOS
PIIX4
DRAM LED
PROMISE
(Indicate)
+
SW
Winfast L2300
7-1-1998
39
CPU
Intel
STR LED Connector
440BX
External.
1
Advertisement
Table of Contents
