Advertisement
Signal/Noise： ： ： ：
90dB
Function:
/
Level
volume control–crossover frequency control–automatic control–phase control-low
gain control.
Input terminals：
Line level，high level
Output terminals:
Line level，high level
Low pass filter：
Active second order, variable crossover point.
High pass filter：
Passive first order, variable crossover point.
AMPLIFIER DIAGRAM
AMPLIFIER'S UTILIZATION AND SETUP
1. Volume level control:
Before power up, you must assure that the volume level control is set in the lowest position, after
starting; you can adjust the volume level control until you are satisfied with the volume.
2. Crossover frequency control：
The variable crossover frequency allows you to set the crossover point of the subwoofer anywhere
between 40-160Hz. Increasing the crossover frequency will allow more mid-low output from the
subwoofer and decreasing the crossover frequency will allow less mid-low output from subwoofer.
/
speaker level.
/
speaker level.
2
Advertisement
